電熱水鍋爐http://www.tncttc.com/焚燒器，是使燃料和空氣以必定方法噴出混合焚燒的裝置總稱。在電熱水鍋爐焚燒器運用過程中，要留意各期間的安全運用疑問。電熱水鍋爐焚燒器的運用不當，會大大減短鍋爐的運用壽命，這就需求咱們在平時操作中留意加強焚燒器的養護。

1、電熱水鍋爐焚燒器程序控制器需要專業人員配合維修養護掌握好焚燒的控制程序，如預吹掃時刻和焚燒時刻，這些固定參數應當定時檢查不然一旦發作紊亂也許致使事故發作。
Electric water boiler burning program controller requires professionals with the repair and maintenance of master control program incineration, such as the pre-purge time and burning time, these fixed parameters should be checked regularly once seizure disorder or accident might cause seizures.
   
2、電熱水鍋爐燃氣體系走漏檢查，走漏是隨時會發作的事對比風險，小則會使焚燒器不能正常工作大則會引起爆破和火災，因而必須在氣爐焚燒前對燃氣供應體系進行全部走漏檢查其間包含閥門組是不是配以及其各類閥組的運行狀況。
Electric water boiler gas system leak check is ready to leak things will compare the risk of attack, then make a small incinerator is not working properly it will cause a large blast and fire, which must be before the gas stove burning of the gas supply system for all leak check Meanwhile the group is not included with the valve and valve operating conditions of all kinds.
  
3、電熱水鍋爐http://www.tncttc.com/油路體系養護，燃油加熱器和油泵、噴嘴以及管路過濾器定時拆開整理，油泵油壓的檢查調整還要定時檢查油泵的穩定性和噪聲等。
Electric water boiler oil line system maintenance, fuel heaters and pumps, nozzles and line filter timing finishing apart, examine and adjust the oil pump oil pump even regularly check the stability and noise.